Grease clog blocking the drain line
We hydro jet the line with a Spartan Tool machine up to 4,000 PSI. That scours grease off pipe walls and restores full flow. Most grease clogs clear in under an hour.
Commercial kitchen sink unclogging in Melrose Park, Illinois is what we do every day. When your three-compartment sink backs up mid-service, we clear the line fast so you can keep cooking. From grease-packed p-traps to main sewer line clogs, our licensed techs handle commercial sink drain cleaning melrose park il with the right tools and no guesswork.
Tell us what is happening. Our local team will confirm your visit shortly.
Call Now 7087265955 → No spam. No obligation. Just practical help.
Commercial kitchen sink unclogging in Melrose Park, Illinois is the process of clearing blockages from high-volume kitchen drain lines using augers, drain snakes, and hydro jetting equipment. We start by pulling the p-trap and inspecting for grease clog, food particle clog, or soap scum buildup. If the blockage sits deeper, we run a drain camera to find the exact spot. Then we clear it, test the line, and make sure water flows freely before we pack up.
Melrose Park kitchens run hard. Restaurant row along North Avenue and the food prep facilities near Melrose Park Industrial Park push grease and food waste through drain pipes every single day. That buildup hardens overnight and chokes the line by morning. If you need emergency commercial kitchen sink unclogging melrose park il near me, we answer the phone and roll a truck. Same-day commercial kitchen sink unclogging melrose park il Illinois is standard for us, not a special request.
Every commercial kitchen sink unclogging job includes a full diagnosis, clog removal, flow test, and cleanup. We also inspect for related issues like p-trap leaks or pipe damage. If we find something, we show you and quote the repair. No surprise add-ons.
We pull the drain cover and inspect the p-trap. Then we run a Milwaukee drain camera down the line to find the exact clog location. You see what we see.
We use a RIDGID drain snake, General Pipe Cleaners auger, or Spartan Tool hydro jetting machine to clear the clog. We match the tool to the clog type.
After clearing, we fill the sink and let it drain. We confirm water flows freely and there is no standing water. If it is still slow, we keep working.
We run the camera one more time to confirm the pipe is clear. We also check for cracks, offsets, or root intrusions. You get a verbal report.
We wipe down the area, haul away debris, and give you tips to prevent future clogs. We also recommend drain covers and grease disposal best practices.
You call, we ask the right questions: Is it one sink or all of them? Is there standing water? When did it start? That tells us whether you have a p-trap clog or a main sewer line clog. We give you a arrival window and a price range on the spot.
Our tech arrives with gloves, bucket, and drain camera. We pull the drain cover and inspect the p-trap first. If the clog is visible, we remove it by hand. If not, we run the camera down the drain pipe to find the exact blockage point. Takes 10 to 15 minutes.
For grease clogs, we use a RIDGID drain snake or General Pipe Cleaners auger to break up the blockage. For heavy sludge, we bring in the Spartan Tool hydro jetting machine. Water pressure up to 4,000 PSI scours the pipe walls clean. Most clogs clear in 30 to 60 minutes.
We fill the sink and let it drain. Then we run the drain camera one more time to confirm the pipe is clear and there are no cracks or offsets. If we see a p-trap leak or pipe damage, we show you the footage and quote the repair before we leave.
We wipe down the work area, haul away debris, and give you a written summary. You also get simple prevention tips: install drain covers, never pour grease down the sink, and flush with hot water after service. That keeps your line clear longer.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
We use this to break up grease and food clogs in pipes up to 4 inches. It is our go-to for most commercial sink clogs.
We run this camera down the drain line to find the exact clog location. You see the footage on our monitor.
This machine delivers water pressure up to 4,000 PSI. We use it to scour grease and sludge off pipe walls.
We use this manual auger for smaller lines and p-traps. It gives us precise control for tough clogs.
We use these to remove and reinstall p-traps and drain pipes. Plumber's tape ensures a leak-free seal.
We always bring a bucket to catch water and gloves to keep the job clean. No mess left behind.
A busy restaurant on North Avenue had a three-compartment sink that backed up every night. Water stood 3 inches deep. They were using a plunger every hour. Health inspector was due in two days.
We hydro jetted the 2-inch line with a Spartan Tool machine. Removed 15 feet of grease and food sludge. Water drained in under 30 seconds. Inspector passed them the next day.
A food prep facility near Melrose Park Industrial Park had multiple sinks backing up. Floor drains were overflowing. They had to shut down production for a day.
We ran a Milwaukee drain camera and found a main sewer line clog 40 feet out. We used a RIDGID drain snake to break it up, then hydro jetted the line. Production resumed the next morning.
A homeowner near Silver Creek had a kitchen sink that drained slowly for weeks. Standing water in the basin. They tried chemical drain cleaners with no luck.
We pulled the p-trap and found a food particle clog. We cleaned the trap and snaked the line. Water drained freely. We also replaced a worn p-trap gasket.
From grease clogs to main sewer line backups, we handle the mess so you can get back to business. Here are the most common problems we fix.
Ask a pro →We hydro jet the line with a Spartan Tool machine up to 4,000 PSI. That scours grease off pipe walls and restores full flow. Most grease clogs clear in under an hour.
We pull the p-trap, remove the clog by hand, and clean the trap. If the p-trap is damaged, we replace it with a new one. We use pipe sealant and plumber's tape for a leak-free fit.
We use a Milwaukee drain camera to see the buildup. Then we hydro jet the line to remove soap scum and sludge. Your drain flows like new.
We run a camera to locate the clog. Then we use a RIDGID drain snake or hydro jetting machine to clear it. We also inspect for root intrusions and pipe damage.
Most commercial kitchen sink unclogging jobs in Melrose Park IL cost between $250 and $600. The price depends on clog depth, pipe size, and whether we need hydro jetting. Simple p-trap clogs run $250 to $350. Main sewer line clogs that need a camera and jetting run $450 to $600. We quote upfront.
Commercial sink drain cleaning in Melrose Park IL Illinois is the process of removing grease, food particles, and sludge from kitchen drain lines. We use drain snakes, augers, and hydro jetting machines to clear the pipe. Then we run a camera to confirm the line is clean. It is not the same as residential drain cleaning because commercial lines handle much more volume.
Yes. We offer after-hours and emergency commercial kitchen sink unclogging in Melrose Park IL. If your sink backs up during dinner service or at 2 a.m., call us. We charge a fair after-hours rate and arrive with the same equipment. Most emergency calls are cleared within two hours of your call.
Yes. We handle large commercial kitchen sink clogs in Melrose Park IL all the time. Our Spartan Tool hydro jetting machine delivers up to 4,000 PSI, which cuts through heavy grease and sludge. We also carry a Milwaukee drain camera to inspect the line after clearing. If the clog is in the main sewer line, we clear that too.
Call us now for same-day service. We are licensed, insured, and ready to clear your commercial kitchen sink clog. Upfront pricing, no surprises. One call and we are on the way.
Call Now 7087265955 →Call 708-726-5955 any time, day or night. We answer the phone, give you a time window, and send a licensed tech with a snake, auger, and jetting equipment. Most kitchen sink clogs clear the same day you call.